Used in surface of epe foam sheet/film
Material: PE film,aluminum foil,plastic-coated paper,plastic-coated fabric,etc
Certification: CE, ISO9001
Skype:lewis15863824208
EPE Foam Sheet Laminating Machine Introduction:
FC-FM EPE Foam Sheet Laminating Machine is a kind of deeply-processed equipment for EPE foam sheet. It is to make laminated product with PE film or aluminum foil. The EPE laminated foamed sheet can improve the intensity with the features of damp proofing, waterproofing and good surface. Furthermore, it can print words and pictures on surface, and further improve the quality and applications. It can be used in the packing of inner, precision instrument, top-grade porcelain and so on.
FC-FM laminating machine is mainly use heat conducting oil as heat transfer medium, symport sheets and films. It has the strengths of good effects of ginning and laminating, high efficiency, easy to operate.
Structural Properties of EPE Foam Sheet Laminating Machine
1. The laminating machine made by four parts: Roll-placer, Expand, Heat laminate, Winder;
2. The main part of EPE Foam Sheet Laminating Machine is controlled by frequency, the power is 1.5KW;
3. Material of heating roll: STPG steel, coat Teflon on the surface. It is durable and not adhesions film; The size of roll surface is 1600mm*270 diameter. Tempreture of roll is 120-150centigrade, thickness 1mm-50mm.
4. Heating roller includes 6 heating pipe which ensure the roller heating evenly by heating oil.
5. The winder controlled by torque motor and pneumatic shaft
Machine Unit of EPE Foam Sheet Laminating Machine:
1: Heating roller:
Size: Size of laminating— Heating roller: 270mm× 1600mm
Laminating— Roller Pressure: 3-7kg/cm2
Laminating material: Surface treatment by teflon
Heating Method: Electric heating
There is conducting hot oil inside laminating roller, the conducting effect is very good.
Temperature of hot roller: 90-130
Heating power: 18KW
2: Rubber Roller:
Size of rubber roller: 270mm*1600mm
Rubber hardness: HS-A700
Drive power: 1.5KW
3: Winding motor:
8N. M
4: Expending roller:
100mm× 1600mm× 1set
5: Winding unit torque motor control
Driving method: Gear box driven by motor, direct transmission, easy operation, safety and beauty.
6: Control unit:
Electric control cabinet one set
For temperature control: Adopt high accuracy intelligent temperature controller, set PID controller inside, guarantee the working temperature control accuracy for motor control: Adopt inveter control it. Adjust and choose rotating speed by working condition
Equipped with meter counter. Length can be freely set as needed. After reaching the set length, meter counter will give signal. Signal ringing.
Light curtain protection unit one set, if the body or something will enter into the gap of heating roller carelessly, the curtain will send a signal to make the rollers separate to ensure body safe and equipment undamaged.
Structural Properties of EPE Foam Sheet Laminating Machine
1. The laminating machine made by four parts: Roll-placer, Expand, Heat laminate, Winder;
2.The main part of EPE Foam Sheet Laminating Machine is controlled by frequency, the power is 1.5KW;
3. Material of heating roll:STPG steel, coat Teflon on the surface. It is durable and not adhesions film; the size of roll surface is 1600mm*270 diameter. tempreture of roll is 120-150centigrade,thickness 1mm-50mm.
4. Heating roller includes 6 heating pipe which ensure the roller heating evenly by heating oil.
5.The winder controlled by torque motor and pneumatic shaft
| Main Technical Parameters of EPE Foam Sheet Laminating Machine |
| Model: | | FC-1200 | FC-1500 | FC-1800 |
| Product Width: | mm | 1200 | 1500 | 1800 |
| Heating Method: | | Electrical heating |
| Driving Power: | kw | 1.5 | 2.2 | 2.2 |
| Installed Power: | kw | 15 | 18 | 20 |
| Dimension: | m | 4.5x1.8x1.8 | 4.5x2.2x2.0 | 5.0x2.4x2.2 |
| Total Weight: | t | 2 | 2 | 2.5 |
